Thermal design of automobile exhaust based thermoelectric generators: Objectives and challenges KM Saqr, MK Mansour, MN Musa International Journal of Automotive Technology 9, 155-160, 2008 | 214 | 2008 |
Thermal analysis of novel minichannel-based solar flat-plate collector MK Mansour Energy 60, 333-343, 2013 | 65 | 2013 |
Innovative correlation for calculating thermal performance of counterflow wet-cooling tower MK Mansour, MA Hassab Energy 74, 855-862, 2014 | 42 | 2014 |
Effect of volume expansion on the melting process’s thermal behavior MA Hassab, MM Sorour, MK Mansour, MM Zaytoun Applied Thermal Engineering 115, 350-362, 2017 | 38 | 2017 |
Development of novel control strategy for multiple circuit, roof top bus air conditioning system in hot humid countries MK Mansour, MN Musa, MNW Hassan, KM Saqr Energy Conversion and Management 49 (6), 1455-1468, 2008 | 36* | 2008 |
Practical effectiveness-NTU model for cooling and dehumidifying coil with non-unit Lewis Factor MK Mansour Applied Thermal Engineering 100, 1111-1118, 2016 | 19 | 2016 |
Numerical simulation of flashing process in MSF flash chamber M Khamis Mansour, HES Fath Desalination and Water Treatment 51 (10-12), 2231-2243, 2013 | 17 | 2013 |
Buoyancy-induced flow and heat transfer in a porous annulus between concentric horizontal circular and square cylinders F Moukalled, M Darwish, J Kasamani, A Hammoud, MK Mansour Numerical Heat Transfer, Part A: Applications 69 (9), 1029-1050, 2016 | 12 | 2016 |
Thermoeconomic optimization for a finned‐tube evaporator configuration of a roof‐top bus air‐conditioning system MK Mansour, MN Musa, MNW Hassan International journal of energy research 32 (4), 290-305, 2008 | 12 | 2008 |
Novel lumped modeling for determining thermal performance of DX evaporator under partially-wet and fully-wet conditions MK Mansour, MA Hassab Applied Thermal Engineering 98, 1025-1035, 2016 | 10 | 2016 |
Thermal design of cooling and dehumidifying coils MK Mansour, M Hassab Heat Exchangers-Basics Design Applications, 2012 | 9 | 2012 |
Thermal Design of Cooling and Dehumidifying Coils, Heat Exchangers-Basics Design Applications, Dr. Jovan Mitrovic MK Mansour, M Hassab InTech. Print, 2012 | 7 | 2012 |
Effect of natural convection on conjugate heat transfer characteristics in liquid minichannel during phase change material melting MK Mansour Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2014 | 6 | 2014 |
Comparative study for different demister locations in multistage flash (MSF) flash chamber (FC) M Khamis Mansour, HES Fath Desalination and Water Treatment 51 (40-42), 7379-7393, 2013 | 6 | 2013 |
The effect of axial wall conduction on heat transfer parameters for a parallel-plate channel having a step change in boundary conditions MA Hassab, MK Mansour, MS Ismail Numerical Heat Transfer, Part A: Applications 63 (6), 430-451, 2013 | 6 | 2013 |
A new and practical ε-NTU correlation for the humidification process under different Lewis number MK Mansour, HE Fath Desalination 395, 72-78, 2016 | 5 | 2016 |
Novel approach of thermal modeling of partially dry–wet chilled water cooling coil under unit and nonunit Lewis number conditions MK Mansour, MA Hassab Numerical Heat Transfer, Part B: Fundamentals 70 (2), 164-181, 2016 | 5 | 2016 |
CFD analysis of vapor flow and design improvement in MED evaporation chamber M Khamis Mansour, MA Qassem, H Fath Desalination and Water Treatment 56 (8), 2023-2036, 2015 | 5 | 2015 |
Numerical analysis of conjugate heat transfer for circular liquid minichannel MK Mansour JP journal of Heat and Mass transfer 7 (1), 2013 | 5 | 2013 |
Buoyancy-induced flow, heat, and mass transfer in a porous annulus F Moukalled, J Kasamani, M Darwish, A Hammoud, MK Mansour Numerical Heat Transfer, Part A: Applications 72 (2), 107-125, 2017 | 3 | 2017 |