Review on Cold-formed steel Connections YH Lee, CS Tan, S Mohammad, M Md Tahir, PN Shek The Scientific World Journal 2014, 2014 | 87 | 2014 |
Push-off tests on pin-connected shear studs with composite steel–concrete beams MM Tahir, PN Shek, CS Tan Construction and Building Materials 23 (9), 3024-3033, 2009 | 34 | 2009 |
Finite element analysis of flush end-plate connections connected to column web MM Tahir, I Juki, LH Yong, S Mohammad, SP Ngian International Journal of Steel Structures 11 (3), 247-258, 2011 | 21 | 2011 |
247 Finite Element Analysis of Flush End-plate Connections Connected to Column Web MM Tahir, I Juki, LH Yong, S Mohammad, SP Ngian, M Dundu, CK Kang, ... | 21* | |
Experimental investigation of short cruciform columns using universal beam sections MM Tahir, PN Shek, A Sulaiman, CS Tan Construction and Building Materials 23 (3), 1354-1364, 2009 | 20 | 2009 |
Numerical modelling of stiffness and strength behaviour of top-seat flange-cleat connection for cold-formed double channel section YH Lee, CS Tan, YL Lee, MM Tahir, S Mohammad, PN Shek Applied Mechanics and Materials 284, 1426-1430, 2013 | 15 | 2013 |
Experimental Investigation on Slip-In Connection for Cold-Formed Steel Double Channel Sections CS Tan, MM Tahir, PN Shek, ABH Kueh Advanced Materials Research 250, 1038-1041, 2011 | 15 | 2011 |
Maximum local thermal effects carpet plot for symmetric laminated composite plates ABH Kueh, WW Seh, PN Shek, CS Tan, MM Tahir Advanced Materials Research 250, 3748-3751, 2011 | 11 | 2011 |
Compressive Strength of Ground Waste Seashells in Cement Mortars for Masonry and Plastering CP Woon, PN Shek, MM Tahir, ABH Kueh Applied Mechanics and Materials 727, 167-170, 2015 | 10 | 2015 |
Flexural performance of laminated composite plates with diagonally perturbed localized delamination CZ Kam, ABH Kueh, PN Shek, CS Tan, MM Tahir Advanced Science Letters 14 (1), 455-457, 2012 | 10 | 2012 |
Experimental Investigation on Wide-span Cold-formed Steel Roof Truss System S Mohammad, MM Tahir, CS Tan, PN Shek Applied Mechanics and Materials 166, 1304-1307, 2012 | 9 | 2012 |
Typical tests on cold-formed steel structures M Md Tahir, CS Tan, PN Shek | 9 | 2006 |
Effective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure Bending YL Lee, CS Tan, YH Lee, S Mohammad, MM Tahir, PN Shek Applied Mechanics and Materials 284, 1300-1304, 2013 | 7 | 2013 |
Experimental Evaluation of Flush End-Plate Connection with Built-Up Hybrid Beam Section PN Shek, MM Tahir, A Sulaiman, CS Tan Advances in Structural Engineering 15 (2), 331-342, 2012 | 6 | 2012 |
Influence of Angle Thickness towards Stiffness and Strength Prediction for Cold-Formed Steel Top-Seat Flange Cleat Connection YH Lee, CS Tan, MM Tahir, S Mohammad, PN Shek, YL Lee Applied Mechanics and Materials 479, 1144-1148, 2014 | 5 | 2014 |
Structural Behaviour of Combined Flange-Cleat and Gusset Plate Connection for Cold-Formed Steel Double Channel Sections CS Tan, MM Tahir, PN Shek, S Mohammad, ABH Kueh Advanced Science Letters 15 (1), 5-8, 2012 | 5 | 2012 |
Performance Of Cruciform Column Using Universal Beam Sections Under Axial Compression Load MM Tahir, PN Shek Jurnal Teknologi 43 (1), 51–66, 2012 | 5* | 2012 |
Performance of cruciform column using universal beam sections under axial compression load PN Shek Jurnal Teknologi B 43 (B), 51-66, 2005 | 5 | 2005 |
Experimental Investigation on Locally Produced Cold-Formed Steel Sections for Roof Truss System SP Ngian, MM Tahir, TC Siang, AKB Hong, S Mohammad Advanced Science Letters 13 (1), 620-623, 2012 | 4 | 2012 |
Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration CZ Kam, ABH Kueh, KB Low, XY Wang, PN Shek Materials Research Innovations 18 (S6), S6-109-S6-116, 2014 | 3 | 2014 |