Development of in-pipe inspection robot: A review IN Ismail, A Anuar, KSM Sahari, MZ Baharuddin, M Fairuz, A Jalal, ... 2012 IEEE Conference on Sustainable Utilization and Development in …, 2012 | 101 | 2012 |
Manipulating the H2/CO ratio from dry reforming of simulated mixed waste plastics by the addition of steam JM Saad, PT Williams Fuel Processing Technology 156, 331-338, 2017 | 78 | 2017 |
Pyrolysis-catalytic-dry reforming of waste plastics and mixed waste plastics for syngas production JM Saad, PT Williams Energy & Fuels 30 (4), 3198-3204, 2016 | 76 | 2016 |
Influence of process conditions on syngas production from the thermal processing of waste high density polyethylene JM Saad, MA Nahil, PT Williams Journal of analytical and applied pyrolysis 113, 35-40, 2015 | 69 | 2015 |
Catalytic dry reforming of waste plastics from different waste treatment plants for production of synthesis gases JM Saad, PT Williams Waste Management 58, 214-220, 2016 | 64 | 2016 |
Comparison of waste plastics pyrolysis under nitrogen and carbon dioxide atmospheres: A thermogravimetric and kinetic study JM Saad, PT Williams, YS Zhang, D Yao, H Yang, H Zhou Journal of Analytical and Applied Pyrolysis 156, 105135, 2021 | 60 | 2021 |
Development of a low cost small sized in-pipe robot MRAM Zin, KSM Sahari, JM Saad, A Anuar Procedia Engineering 41, 1469-1475, 2012 | 57 | 2012 |
Pyrolysis-catalytic dry (CO2) reforming of waste plastics for syngas production: Influence of process parameters JM Saad, PT Williams Fuel 193, 7-14, 2017 | 55 | 2017 |
Steam reforming of polystyrene at a low temperature for high H2/CO gas with bimetallic Ni-Fe/ZrO2 catalyst H Zhou, JM Saad, Q Li, Y Xu Waste Management 104, 42-50, 2020 | 37 | 2020 |
Low-temperature hydrothermal carbonization of pectin enabled by high pressure S Yu, P Zhao, X Yang, Q Li, BA Mohamed, JM Saad, Y Zhang, H Zhou Journal of Analytical and Applied Pyrolysis 166, 105627, 2022 | 34 | 2022 |
Microwave-assisted hydrothermal carbonization for solid biofuel application: a brief review MF Zulkornain, S Normanbhay, JM Saad, YS Zhang, S Samsuri, ... Carbon Capture Science & Technology 1, 100014, 2021 | 31 | 2021 |
Robot for boiler header inspection “LS-01” MZ Baharuddin, JM Saad, A Anuar, IN Ismail, NMH Basri, NS Roslin, ... Procedia Engineering 41, 1483-1489, 2012 | 28 | 2012 |
Influence of nickel-based catalysts on syngas production from carbon dioxide reforming of waste high density polyethylene JM Saad, MA Nahil, C Wu, PT Williams Fuel Processing Technology 138, 156-163, 2015 | 26 | 2015 |
Optimization of rice husk hydrochar via microwave-assisted hydrothermal carbonization: Fuel properties and combustion kinetics MF Zulkornain, S Normanbhay, JM Saad, MFMA Zamri Bioresource Technology Reports 17, 100888, 2022 | 23 | 2022 |
A review on recent progress in membrane distillation crystallization WNA Wan Osman, NI Mat Nawi, S Samsuri, MR Bilad, Y Wibisono, ... ChemBioEng Reviews 9 (1), 93-109, 2022 | 18 | 2022 |
Valorisation of organic fraction municipal solid waste via anaerobic co-digestion of Malaysia tropical fruit for biogas production MFMA Zamri, A Akhiar, MEM Roslan, MHM Marzuki, JM Saad, ... IOP Conference Series: Earth and Environmental Science 476 (1), 012077, 2020 | 8 | 2020 |
Characterization studies on waste plastics as a feedstock for energy recovery in Malaysia L Surenderan, JM Saad, H Zhou, H Neshaeimoghaddam, AA Rahman International Journal of Engineering and Technology 7 (4.35), 534-537, 2018 | 7 | 2018 |
Parametric study of glycerol and contaminants removal from biodiesel through solvent-aided crystallization MA Ahmad, A Letchumanan, S Samsuri, WNA Mazli, J Md Saad Bioresources and Bioprocessing 8, 1-12, 2021 | 6 | 2021 |
Factory tea waste biosorbent for Cu (II) and Zn (II) Removal from wastewater P Tan Peng Jun, WNA Wan Osman, S Samsuri, J Md Saad, ... E3S Web of Conferences 287 (04006), 1-7, 2021 | 6 | 2021 |
Heavy Metal Ion Adsorbent in Aqueous Solution: A Review on Chitosan and Chitosan Composites M Muhaidin, FH Naning, JM Saad, R Wahi, T Zangina Journal of Advanced Research in Micro and Nano Engineering 18 (1), 78-102, 2024 | 4 | 2024 |